YZ65 YZ80 YZ85 Restoration Bolt Kit For Yamaha YZ 65 80 85 100 Specbolt OEM Zinc

Description

RESTORATION FASTENER KIT FOR
YAMAHA YZ65 YZ80 YZ85 YZ100 with
OEM ZINC FINISH
1982 through current
This Specbolt full restoration kit will come completely labeled and contains the following fastener sets for easy installation on your YZ Mini.
FULL ENGINE:
Crankcase Bolts
and Drain Washer.
Top End Kit***
including 4 Cylinder Head Acorn Flange Nuts paired with 4 Copper Crush Washers, Cylinder Base Nuts, Bolts for Reed Valve/Intake, Power Valve Covers, Exhaust Manifold, Water Neck, and OE match M6 Coolant Drain Bolts w Copper Washer.
Left Side Engine Cover
(Ignition) and Case Saver bolts.
Right Side Engine Covers
(Clutch 1pc or 2pc) with the Oil Check Bolt and Copper Washer.
Water Pump
including the Coolant Drain Bolt and Copper Washer
CHASSIS/BODY:
Exhaust
Pipe Muffler and Silencer Mounting Bolts and Nuts.
Frame
includes Bolts and Nuts for Head Stay, Lower Subframe Bolts, Ignition Coil, and Motor Mount Nuts (Sorry no motor mount bolts or upper subframe bolt available).
Front End
includes all bolts for Upper and Lower Tripleclamps, handlebar clamps, Front Brake Caliper, Front Axel Pinch Bolts/Nuts, Front Number Plate, and Fork Guard Bolts.
Front Brake Master Cylinder
contains Bolts for Perch, Brake Fluid Reservoir Cover Screws, and a new Fuji Lock nut for your Lever pivot bolt.
Front Fender
Bolts, Collars, and Fender Washers.
Front & Rear Brake Rotors
Bolts.
Fuel Tank
Mounting Bolts for Tank, Radiator Shroud Bolts and Collars, and Petcock.
Throttle / Clutch Perch
Bolts and Pivot Nuts.
Shifter / Kick Start
bolt.
Radiator Mounting
Bolts and Washers.
Rear Brake Guard
Bolts.
Rear Brake Master Cylinder
and Reservoir Bolts.
Rear Fender
Mounting Bolts, Washers, and Lock Nuts.
Rear Wheel
Sprocket Bolt and Chain Adjuster Bolt Sets.
Seat / Side Panels
Mounting Bolts and Collars.
Swing Arm
Hardware for Chain Guide, Chain Slider, Chain Rollers, and Brake Line Guides.
NOT INCLUDED:
Main Motor Mounts, Axles, or Rear Suspension.
With a Specbolt OEM Zinc Restoration kit, you will get a stock factory look for your bike. Oh, and we get rid of the Phillips
engine
screws and replace them with reduced head flange bolts to match the rest of the engine.
Used by these top guys and others:
Chad Watts
Tom Morgan
Rob Selvey (RIP)
RPM Racing Team
KTM
Adam Millar
AEO Powersports
Cody Webb
BRC
Team Gas Monkey Energy
AJE Motorsports
Roodz Garage
Frankie Garcia
Jay Clarks DirtbikeTV
MRE
Mojo Motosports
Dirt n Iron
XC Gear
Rowland Sands
Steward Baylor
Zeal Racing
Tyler Monagan
Ron Lechien
Aaron Colton
Bill Dill 3D Racing Yamaha
Brad Baker
Broc Shoemaker
Cooper Abbott
Destry Abbott
David Vuillemin
Devin Harriman
Jeff Emig
Ryan Hughes
The Deegans
Justin Starling
Kristopher Puffer
Lars Larsen
Marty Tripes
Dirt Bike Magazine Builds
Mickey Dunlop
Mike Brown
Ronnie Renner
Twitch
Scott Burnworth
and more...