This has been a winter project So I've done a quite a bit of work plus several new parts which include 4 new tires ,battery, coil , plugs, fuel line , starter . That cover all the new parts that I have replaced . There are a few more things that need to be fixed .I didn't remove or clean the carburetor so the engine has a slight surge , bit if you give it a little choke it runs fine . The head lights are in place and are not broken but they are not working . They look to be wired correctly probably a bad fuse or switch, I haven't really checked them out . I took several pictures and if you need more please feel free to contact and I'll see what I can do . The 42" mower deck is very solid top and underneath , there are no missing springs or parts as far as I can tell There is a dent in the front section of the deck . I have mowed with it and that works as it should . The hydrostatic transmission works as it should .There is a plate which was welded to the rear behind the seat the previous owner must have put it there for some type of equipment . The seat has a Wheel Horse logo on it and a piece of particle board as a mounting plate . I bought this from the previous owner son and he said his dad never let it set out in the weather . I'm not excited about selling it but I really don't have the room to keep it Plus with work and other projects it would be winter before I can finish it up . This cost 2,579.00 back in 1984 so that's my opening price .To be honest I have no idea what is worth so I'm willing to take offers . Thanks for looking