Polini Thor 200 Paramotor Wooden Propeller PPG powered paraglider, Thor200

Description

Brand New 49 inch (125 cm)" beautiful wooden propeller specifically built for the Polini Thor 200
This propeller as seen in the pictures has a 6 hole
, 8 mm bolt pattern sitting on a 75 mm circle pattern and 1 inch center hole.
The prop is designed for belt drive engines that are in a puller configuration.
The prop spinning left (counter clockwise ) as facing the paramotor from the back (direction of flight).
Propeller has ben balanced.
You have options on red tips or clear.
Please let us know on your selection
Main features of propeller:
Diameter : 125 cm (
49.2 in
)
Reduction ratio 1:2.8
Drilling pattern : 6 M8 d75mm (6 screws dia 8 mm on a circle 75 mm diameter)
Rotation sense : Left (counterclockwise) in the wind made by the propeller
Pusher
Beautiful wood construction
Excellent finish
Balanced
We have props for other motors as well. Just ask.
If you not sure about your bolt pattern please sent us message before you buy and we will gladly help you.
-Please make sure this is the correct propeller for your paramotor.
-Due to the delicate nature of propellers, returns are limited.
-We cannot accept returns on propellers once they have been bolted to the engine.
-We will not accept returns on propellers that have been wound up or flown even once.
-On returns and exchanges we have to charge 10% restocking fee.
If this is your prop, get it and let's fly again.
Please feel free to contact us with any questions
regards PPG.
ParaglidingUnlimited com