Pet Coffin Casket for Dogs or Cats 23 x 15 x 6 All Cedar U-Build-It Assembly Kit

Description

Cedar Pet Coffin
Printed assembly instructions included
Outside Dimensions: 23 x 15 x 6 Inches (Length x Width x Height)
Inside Dimensions: 22 x 14 x 5 Inches (approximate)
U-Build-It Kit
This is a project kit for building a cedar pet coffin.  Printed assembly instructions are included as well as hardware.  All parts are provided as semi-finished and sanded planks and all parts cut to size.  All hardware is provided.  Printed assembly instructions show step-by-step how to complete this item.
Tools needed: Hammer, electric screwdriver, and palm sander or orbital sander.  Note: You can build this with a hammer and use the finishing nails provided, but it is strongly recommended that you assemble this kit with an electric screwdriver.  Other supplies: You should use yellow woodworker's glue such as TiteBond as noted in the instructions.
Estimated assembly time: Approximately 1 hour.
Overnight Shipping Available Upon Request. You will need to contact us to make arrangements and we will need to find out the overnight shipping cost to your address.
This pet coffin is for small animals such as cats or small dogs up to about 30 pounds. You should take measurements.
Losing your pet is difficult and can be a truly devastating moment for your and your family. If it is that time, provide them with the love and respect they deserve. This Cedar Pet Coffin you can ensure a proper and loving burial in a handcrafted cedar coffin. Let your friends know how much you loved your pet.
This product is made in the USA. Different sizes are available to fit your pet, so if you need a larger size, please ask.
No finish is applied to this product.  However, you can apply a linseed oil finish to the outside if you wish, or spray lacquer. This product is shipped via Priority Mail. If you need overnight/express mail, please contact us.
Product notes:
Assembly method:
1. Build the frame which consists of side panels, end panels, and corner posts.
2. Build the top and bottom panels, which consists of three planks and two cross braces.
2. Attach the bottom panel to the frame, which forms a box.
4. The last step is to attach and nail down the top panel to seal the pet coffin.
Material Notes: We use real cedar planks (not particle board), and planks are milled and planed to a thickness of approximately 1/2 inch thickness.  The planks are ''rough sanded'' which means they are smooth, but not sanded to furniture grade perfection, and you may want to do additional *sanding at your preference.  Because these planks are real cedar wood, the cedar planks may develop minor cupping or warping due to changes in humidity, but these planks are flexible.
*Caution: When sanding cedar, wear a dust mask or bandana or scarf over mouth and nose to not inhale cedar dust.
Assembly instructions with photos are included with our telephone number if you need any assistance.