-40%

Original Disc Adhesive Plate Hangers 5.5 Inch

$ 3.14

Availability: 80 in stock
  • Color: Yellow
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • Use on Mirrors: Silvering on back on mirror glass may prevent bond
  • Item must be returned within: 30 Days
  • Material: Fabric
  • Potential Uses: All fired materials, e.g. unglazed backs of tiles
  • Item Width: 5.5"
  • All returns accepted: Returns Accepted
  • Item Length: Less Than 10 in
  • Use on Glass: Transparency of glass items make disc visible
  • Country/Region of Manufacture: United Kingdom
  • MPN: Does Not Apply
  • Item Height: 6.5"
  • Use on Wooden Articles: Not recommended, sticks tNot o some and not others
  • Size: 5.5"
  • For Plate Size: up to 12"
  • Use on China and Porcelain Bowls: Fired items provide strong bond & great 3D effect
  • Use on Plastic: Does not adhere to all plastic, such as melamine
  • Brand: The Flatirons Disc Co.
  • For Weight: 7 lbs.
  • Type: Invisible Plate Hanger
  • Manufacturer: The Disc Plate Hanger Co.
  • Return shipping will be paid by: Seller
  • Condition: New

    Description

    Original Invisible Disc Adhesive Plate Hangers
    These English Plate Hangers have been tested and proven for over 30 years. Use them to hang porcelain, china, earthenware, glass, unvarnished wood, and more. Display your plates, platters, trays, trivets, chargers, decorative crafts, and three-dimensional household decor on your walls.
    Five and a half inch disc plate hangers are ideal for displaying items such as full size plates and trays, decorative mirrors, large chargers, and heavier decor. Use two discs to hang heavier decor (up to 14 lbs) such as large trays and platters, large bowls and dishes, and chargers. Their larger size allows you to trim them to fit most irregular shaped decorations.
    No More Ugly Wires
    Disc hangers fit totally behind the plate or any item you hang. Unlike a wire plate hanger, that shows hooks, clips, or wires, disc plate hangers are invisible when you look at the plate. They will not distract from your wall hangings.
    Note
    : Disc hangers have a yellow color. They are clearly visible behind glass or transparent plates.
    Easily Removable
    Discs remove without marking plates. They are designed so that they can be used and removed without spoiling the plate's underglaze markings. Just soak the plate in warm water to remove the Disc.
    Plates Lay Flat against the Wall
    Wire plate hangers may have springs and sizable hardware that make them lay awkward on a wall. Disc play hangers adhere flat against the back of plates and decor, and therefore display your decor nicely on the wall.
    Great for Collector Plates
    Collector plates often have writing or paper labels on the back. You do not want to disturb these. Wire plate hangers may hide the writing or label. Use two small plate hangers attached to the lips or side of plate. String picture hanging wire between them. Take care not to get any labels wet.
    Safety Assured
    With correct preparation and installation, the adhesive hangers provide a strong bond that will adhere permanently to your hangings. The glue will not deteriorate over time. The discs remain unaffected by normal fluctuations in household temperature and humidity. They will not chip or damage plates like wire and spring loaded plate hangers.
    Perfect for Large Displays and Small Decor
    The large adhesive hangers provide the perfect solution for hanging large trays and bowls. Use more than one hanger to hang larger and heavier items. Trim the adhesive discs to hang smaller items and get the perfect fit.
    Ideal for Odd Shaped Items
    Unlike wire plate hangers, discs work on most any shaped object. You can trim them to fit three dimensional and irregular shaped crafts and decor.
    Easy to Use
    Follow directions carefully.
    Clean the back of the plate by hand, even if the plate is new. Use dishwashing liquid. Rinse thoroughly and dry with clean cloth. Plate
    must
    be clean for disc to bond.
    Use fingers to mix water into glue on disc. Wait 3-7 minutes for glue to become sticky. Glue will appear milky white.
    Apply disc to plate. Make sure to place the hanging ring in the correct position for the plate design. Press firmly and rub well to expel any air.
    Let dry overnight.
    Very Important:
    Perform a "Pull Test" to test strength of the adhesion before hanging. To perform the "Pull Test" pull firmly on the ring to ensure the disc has adhered to the plate.
    Available in Five Sizes for Any Size Plate
    Disc Size
    Purpose
    Support Weight up to
    1 1/4" (30mm)
    For plates up to 4" (100mm) diameter
    1lb (500g)
    2" (50mm)
    For plates up to 6" (150mm) diameter
    2lbs (1Kg)
    3" (75mm)
    For plates up to 8" (200mm) diameter
    3lbs (1.5Kg)
    4" (100mm)
    For plates up to 12" (200mm) diameter
    5.5lbs (2.5Kg)
    5.5" (140mm)
    For large plates
    7lbs (3Kg)