-40%

E-Props Carbon Fiber Minari 200cc Paramotor Powered Paraglider Propeller, 125cm

$ 129.35

Availability: 11 in stock

Description

E-Props 125cm Minari 200cc Paramotor Propeller
Plug'N'Fly Propellers
light carbon propellers for paramotors
the only
full carbon
propellers for paramotors on the market
the lightest and the most efficient
The
PLUG'n'FLY
propellers are 100% carbon, the lightest on the market, very strong, in two sectionable parts, simple to assembly. Those propellers are designed with the internal software
LmPTR©
, then manufactured and tested for a lot of paramotors engines. The PLUG'n'FLY propellers are the lightest and the strongest props on the market.
PLUG'n'FLY technical sheet
weight : about 600 gr for a 125 cm diameter model [about 30% less than competitor props]
moment of inertia : about 500 kg.cm² [for a 125 cm diameter model]
blades 100% carbon
specific E-PROPS design with high CL profiles : more thrust, fuel economy and noise reduction
traceability : serial number on each blade (quality control; quick replacement of one blade possible)
propellers designed and manufactured in France, Provence, Sisteron (04)
each propeller is tested on a test bench before delivery
clockwise and counterclockwise models
thickness of the blade's foot : 28 mm
Advantages of a PLUG'n'FLY propeller
VERY LIGHT
about 650 gr for a 125 cm diameter
more resistant propeller => faster acceleration and deceleration of the engine (the propeller is more reactive, it stops much more fast, that is fewer risks of break in case of shock in the propeller), less stored kinetic energy, thus fewer damages in case of impact.
Comfort increased for the pilot = > less mass propeller on the back, fewer gyroscopic efforts, less couple
Better functioning of the engine = > fewer constraints on the reducer, fewer vibrations due to the functioning propeller
DISASSEMBLED
interesting for storage and transport
very easy to assemble and disassemble
simple replacement of one blade
Please note:
On some models, drilling patterns are using
only 4 holes on the 6 holes
. It is normal and those configurations have been calculated and tested.
We have sold hundreds of this style and they have been used worldwide for years. See photo above to see this. Perfect mechanical resistance, saving weight!
Please choose carefully.  Due to the delicate nature of propellers, returns are limited.  We cannot accept returns on propellers once they have been bolted to the engine.  We will not accept returns on propellers that have been wound up or flown even once.
Propellers must be packed very carefully as they are easy to damage in shipping.  We suggest a good deal of extra padding and cardboard to protect the ends.  If the propeller is damaged during return shipping we will not be able to issue you a refund, so consider insuring it with the shipper so you have financial remedy if it is damaged.
***Note about props***
This prop is matched to the specific engine listed above (length, pitch, gear ratio, bolt holes, and centering hole).
Do not buy this prop for any other engine!
While it may fit, it may not work efficiently. You may end up lugging, or overrunning your engine - neither of which are good, and may lead to catastrophic failure!
Visit our eBay Store - TrikeBuggy!