6KG Gas Melting Furnace Kit Propane Forge Copper Gold Silver Metal Casting, US

Description

Items Description ：
6KG Gas Melting Furnace Kit Propane Forge Metal Copper Gold Silver Brass Aluminum 1300°C+113ml Ingot Mould
Description
:
Propane melting furnace
is used for DIY,
jewelry processing factories, jewelry shops, gold panning and other industries.
It is
inevitable product for a Metal smith, Jewelers and Refiners
. It is used to melt
copper, gold, silver, copper, aluminum, zinc
, tin
and other metals with melting points below 1300 ° C
.
Specification :
Name:Gas melting furnace
Model:SG-QTRJL-003-5.5
Furnace outer diameter:φ28CM
Furnace height:27CM
Furnace inner diameter:φ16
Furnace inner height:17CM
Crucible max out diameter:φ120mm
Crucible max inner diameter:φ90mm
Crucible min inner diameter:φ85mm
Crucible height:145mm
Crucible inner height:134mm
Crucible capacity:650ML
Maximum temperature:1300℃(2372°F)
Fuel:Liquefied gas, natural gas, propane
Furnace wall material:Fire-resistant ceramic wool (consumables can be replaced)
Melted metal:Gold, silver, aluminum, copper, Brass, Bronze,Tin K gold and other many metal (metal with a melting point below 1300℃)
Package dimensions:30*30*40CM
Packing weight:10kg
Advantage
s :
1.Use high quality 6KG high quality full graphite crucible
2.The highest temperature can reach 1300 ℃
3.The inner wall is made of fire-resistant ceramic cotton with a thickness of 5CM.
4.Can melt metal with melting point below 1300 ° C. For example: gold, silver, copper, aluminum, zinc
5.Can be melted: 6KG copper, 1.6KG aluminum, 7KG silver, 12KG gold. It takes 15-25 minutes to melt 5.5KG copper
6.Portable structure design, foldable handle, stove weighs 7KG
Benefits for you
1.
Adopt
high quality
6
KG high quality full graphite crucible
(without silicon, competitors' crucibles will look like the following for a long time). The service life is up to
5
00 times.
2.
The highest temperature can
reach 1300 ℃
, and it can melt metal with melting point lower than 1300 ℃. For example: gold, silver, copper, aluminum, zinc
,Tin
3.
Large capacity
: can be melted:
6
KG copper 1.6KG aluminum, 7KG silver, 12KG gold. It takes 20-25 minutes to melt
6
KG copper
4.
The inner wall adopts a package of
5CM fireproof cotton
(which can withstand high temperatures of 1400 ° C) and is a replaceable inner wall material.
5.
Portable size design
, foldable handle design, the whole furnace weigh 7Kg, and works in any place.
Technical Support
:
Installation and use: Need to install a pressure gauge and control valve separately, connected to the gas pipe.
Note:
The inner wall of our products is insulated with fire-resistant cement, which may cause cracks during transportation and use, please don't worry about it, it won't affect the use and won't cause any danger.
1. Can melt copper, aluminum, gold, silver, zinc and other metals with melting point below 1300 ℃
2. Can melt: 6KG copper 1.6KG aluminum, 7KG silver, 12KG gold. It takes 15-25 minutes to melt 5.5KG copper
3.
Before you use it, it must take 5-6 minutes to preheat the melting furnace and the crucible at 300 ℃ -500 ℃.After you use it, you cann't cool it down quickly, you should cool it down naturally. Graphite Crucible is a consumable, you can change a new one according to your requirement.
4. For more convenient control of combustion temperature, install a pressure regulating valve and pressure gauge
5. Please note:
Do not use it to melt iron
, which will shorten the life of the furnace.
6 Before use, please bring high temperature gloves, high temperature mask and high temperature clothing. Prepare a bottle of fire extinguisher beside to prevent accidents.
Precautions for use:
1. Use the site to ensure that it is open, ventilated, and free of flammable materials.
2. Keep the escape route clearly marked during emergencies.
3. Keep the fire extinguisher at hand.
4. Before using this product, please bring high temperature gloves, fire protection masks and other labor protection supplies.
5. The entire melting process requires someone to stare.
6. Prohibit overload smelting to prevent liquid metal from flowing out.
7. Be careful when the raw material is added during the melting process.
8. The air pipe needs to be connected to the pressure valve and pressure gauge.
9. It is forbidden to melt iron, manganese and other metals with a melting point higher than 1400 ℃, otherwise the furnace wall will melt.
10. If it is used for a long time, the material of the inner wall of the furnace can be replaced.
11. Do not look directly at the degree of melting during the melting process to prevent heat waves from damaging the body. Only by taking security measures.
All Products from the factory will be provided for one year warranty after sales and lifetime technical support.
Shipping List
1PCS
Gas
melting furnace
1PCS 6KG capacity crucible
1PCS
B
urner
1PCS
T
rachea
1PCS Clamp
1PCS
113ml Graphite Ingot Mould
1PCS Manual
1PCS
0-30PSI air pressure valve (US Standard Only)
Questions & Answers
Q
:What do I need to be
aware of
when I first time to use it?
A
:
it
need
take 5-6 minutes to preheat the melting furnace and the crucible at 300 ℃ -500 ℃
.
Q
:
Can this furnace melt brass and bronze?
A
:Yes. It can.Since brass melting point is about 900-940 and bronze is about 850-1000 degrees C, then yes. It can
melt copper, aluminum, gold, silver, zinc and other metals with melting point below 1300 ℃
/2400℉.
Q
:
When I receive the product, the internal yellow fireproof mud is damaged, will it have any effect?
A
:The cracked fireproof mud will not affect the use.Furnace interior is fully lined with 2"of ceramic wool, it can withstand high temperatures of 1400 ° C.
Q
:
Can I use natural gas instead of propane?
A
:Of course you can. You can use
Liquefied gas, natural gas, propane
as fuel
.
On Jul-07-21 at 22:45:27 PDT, seller added the following information: